Q5X PlayerMic QT-AD10 for Axient Digital

Description

Q5X PlayerMic QT-AD10 for Axient Digital

The Q5X PlayerMic is a micro-sized transmitter housed in a water-resistant flexible polymer case. The QT-AD10 offers Axient Digital audio transmission with encryption and a high density mode for spectrum efficiency. With an internal lithium polymer rechargeable battery and Lemo connector for a removable lavalier.

• 4 hr run time @ 10mW (PlayerMic S) — 74.5mm x 41.5mm x 11.5mm
• 8 hr run time @ 10mW (PlayerMic) — 93.5mm x 41.5mm x 11.5mm
• Power output range 2 – 20mW

Originally designed for use in sports broadcasts, Q5X transmitters are incredibly thin and rugged and have excellent utility across a range of applications, from reality television to stage productions.

This version of the Q5X PlayerMic, the digital QT-AD10, has been codeveloped with Shure to be compatible with Axient Digital wireless receivers for best-in-class digital wireless transmission. Available in Regular (PlayerMic) and Short (PlayerMic S) sizes.

Remote Control Audio System

All essential setup, management, and monitoring are coordinated through the Q5X MicCommander handheld remote control, which is necessary for operation (sold separately).

The Q5X PlayerMic utilizes RCAS™ (Remote Control Audio System), a revolutionary way to remotely control transmitter settings from a central computer or hand held remote control. The remote functions allow technicians to control; on/off, monitor status and battery level and make on-the-fly adjustments of frequency, mic offset, mic mute, RF power level, and grouping, all wirelessly.

Features:

PlayerMic’s unique one-piece, thin, rubber design protects players from injury should they fall on it or take a direct hit and is extraordinarily concealable.

The QT-AD10 Digital PlayerMic is offered in 4 tuning blocks that span 470 to 700 MHz and 941 to 960 MHz in 25 kHz steps.

The PlayerMic is also available in an analog version (the PlayerMic QT-5100) that is compatible with Shure, Sennheiser, Lectrosonics, and Q5X receivers.

Specifications:

• Dimensions: 74.5mm x 41.5mm x 11.5mm (PlayerMic S),  93.5mm x 41.5mm x 11.5mm (PlayerMic)
• Weight: including battery, 48.6 g (PlayerMic S), 60.7 g (PlayerMic)
• Housing Material: Polymer Case
• Encryption: AES 256 Encryption
• RF output power: 2mW, 10mW, 20mW (user selectable, country restrictions apply)
• UHF frequency range 470 to 700 MHz and 941 to 960 MHz in 4 frequency blocks
• Tunable bandwith: Varies by frequency block (25 kHz steps)
• Modulation type : Shure Axient Digital Proprietary
• Mic offset gain range:  -12 to 21 dB (in 1 dB steps)
• Pre-amplifier Equivalent Input Noise (EIN), System gain setting ≥ +20: -115 dBV, A-weighted, typical
• Maximum input level: 1 kHz at 1% THD, 3 dBV (5.0V)
• Input impedance: 8.2K with 5V Mic Bias
• Frequency response: 20 Hz to 20 KHz
  • NOTE: system frequency response is dependent on the microphone element
• Audio connector: 1 pin Lemo
• Occupied bandwidth: <200 kHz
• Channel-to-Channel spacing
  • Standard Mode – 350 KHz
  • High Density Mode – 125 KHz
• Antenna: 1/4 wave UHF and 2.4 GHz
• Antenna impedance:  50 Ohm
• Battery: Internal Lithium Polymer
• Operating time: (Battery) estimated 4 hrs @ 10mW (PlayerMic S), 8 hrs @ 10mW (PlayerMic)
• Operating temperatures: -20⁰C to 50⁰C
• Storage temperatures: -20⁰C to 45⁰C
• Approvals: FCC, CE, Industry Canada