Schoeps TM RS and TM SRS Table Stand Gooseneck

Description

Schoeps TM RS and TM SRS Table Stand Gooseneck

Schoeps TM RS and TM SRS — Table mounted solutions from Schoeps, featuring single or dual gooseneck elements.

Features:

• elegant table stand with 1 or 2 gooseneck elements
• length: 420 mm (standard version)
• horizontally and vertically adjustable
• with 3/8″ socket or with XLR3M plug at the output
• recommended table flange: TEF-H

Available Versions:

• TM RS 420 E38 (Mfr. code: 133521) — Tube with gooseneck element, integrated CMC 1 capsule, 3/8″ bracket, and 5m cable
• TM RS 420 EU (Mfr. code: 133520) — Tube with gooseneck element, integrated CMC 1 capsule, and XLR3M output directly on the gooseneck
• TM SRS 420 E38 (Mfr. code: 133523) — Tube with 2 gooseneck elements, integrated CMC 1 capsule, 3/8″ bracket, and 5m cable
• TM SRS 420 EU (Mfr. code: 133522) — : Tube with 2 gooseneck elements, integrated CMC 1 capsule, and XLR3M output directly on the gooseneck

Differences between RS and SRS Variants:

• The TM RS has a single gooseneck element on the lower part, whereas TM SRS has an additional gooseneck element at the upper end.
• The lower part of the TM RS and TM SRS table stands is flexible, permitting vertical and horizontal alignment. The long tube element ensures that the arrangement always looks elegant and tidy.

Differences between U and 38 Variants:

• The __38 version, with its 3/8″ socket at the lower end, can be mounted directly onto a 3/8″ tap such as that of the ST 20-3/8 adapter, the T 5 table base, or an STR support rod.
• The __U version has no cable, but an XLR3M plug directly at the bottom end.

In-table mounting:

In-table stands are usually mounted using a TEF table flange. For a 420 mm long table stand, the rigid TEF-H version should be used. A complete table microphone set looks like this, for example:

• B 1 D popscreen
• TM RS 420 E38 tube with capsule
• ST 20-3/8 adapter
• TEF-H table flange